HomeServicesMLS Data IntegrationDoorify MLS
RESO Web API, route set by the board

Doorify MLS listings, on the site you already have.

Doorify MLS is the new name of Triangle MLS. We sync its IDX feed into your WordPress, Laravel or custom site and keep it current every 2 to 3 hours.

Book the feed audit How the switch works
Region
Raleigh
Protocol
RESO Web API, route set by the board
Refresh, configurable
2 to 3 h
RESO Web API handshakeIllustration, not a live connection
  1. Authorization: Bearer {token}
    From the platform your vendor requests.
  2. GET /$metadata
    Fields and lookups on the feed.
  3. GET /Property
    The licensed set, page by page.
  4. @odata.nextLink
    Followed to the end of the set.
  5. $filter=ModificationTimestamp gt {last}
    Every 2 to 3 hours after that.
Credentials issued through the data feed platform your registered vendor requests from Doorify MLS.
The gap

The MLS changed its name. Your feed may need a look.

Triangle MLS became Doorify MLS in September 2024, with a new dashboard and new logins. Raleigh and Durham broker sites still pull the same listings, often through code nobody has checked since. We have synced this board's feed before, on a multi MLS platform we built and ran from 2018 to 2025.

  • Active listingsPending and coming soon included, refreshed every 2 to 3 hours.
  • SoldsSynced on their own schedule, scoped to your office by default.
  • Agent and office rostersFrom the feed, or built from listings when there is no roster access.
  • Open housesSynced and attached to their listings.
  • Photos and virtual toursCarried through and served from an image CDN with resizing.
  • Map searchBox, drawn polygon, radius and neighborhood, with pin clustering.
The board

What Doorify MLS (Triangle MLS) is

Triangle MLS is the MLS for Raleigh, Durham and the Research Triangle in North Carolina. Since September 10, 2024 it has operated as Doorify MLS, and it says it has grown beyond the Triangle.

Subscribers reach Matrix and other tools through the Doorify MLS dashboard. Former Alamance MLS participants and subscribers have also moved onto Doorify.

Doorify offers vendor IDX feeds, a direct IDX feed for an office, and a free Broker Data Feed of an office's own listings. Its data distribution team handles feed requests.

The board decides which platform carries its feed. Each route has its own login, paging and limits, and its own page here.

Feed route RESO Web API Now Doorify MLS. It gives registered vendors a list of data feed platform options. The board sets the route, and the audit confirms it.
Getting access

How a broker gets a Doorify MLS feed

There are two ways in: a registered vendor, or a direct feed requested by the Broker in Charge.

  1. 1

    Choose the route

    A vendor feed through a registered vendor, a direct IDX feed for the office, or a Broker Data Feed of your own listings.

  2. 2

    Vendor registers

    A vendor not yet on the Doorify list completes Doorify registration before it can get IDX access.

  3. 3

    Office sets up the vendor

    The office contacts the vendor to set up an account before IDX can be activated.

  4. 4

    Request the feed

    The vendor requests a data feed from the platform options Doorify lists. For a direct feed, the Broker in Charge submits the request.

  5. 5

    Build, then go live

    The sync is checked against the feed before your pages switch.

Doorify sets the terms and any fees. The Broker Data Feed of your own listings has no fee.
What the feed carries

What the feed carries

Doorify does not publish the format of each platform option in public. The audit reads it from your credentials.

01

Feed types

A vendor IDX feed, a direct office IDX feed, and a Broker Data Feed with only your office's listings.

02

Listings

Every firm that has not opted out, since inclusion is the default.

03

Rosters and open houses

Synced where the feed carries them, or rosters built from the listing feed when it does not.

04

Photos

Carried through and served from an image CDN with resizing.

05

Changes and removals

Pulled by modification timestamp, with a daily purge that skips the run and alerts us if the feed returns too few listings.

Board rules

Rules the sync follows here.

Taken from the board's own published rules and data pages, listed under Sources above. The audit confirms the current version before anything is built.

Vendors register first

A vendor not on the Doorify list has to register with Doorify MLS before it can receive IDX access, then requests a data feed from the platform options Doorify lists.

Direct feeds are office wide

Only the Broker in Charge can request a direct IDX feed, because it grants IDX access for the whole office.

Your own listings are free

Doorify says a Broker Data Feed of the office's own listings carries no fee, and it will send it to your vendor at no charge.

In by default

A firm's listings are in the IDX feed unless the Broker in Charge asks Doorify to opt out.

Your stack

Into WordPress, Laravel or your own stack

WordPress

If you only need your own listings, the free Broker Data Feed may be enough for a small site. A full IDX feed runs from a server cron job into local tables. Footer text that still says Triangle MLS is updated in the same pass.

Laravel

A Doorify config entry and filter class sit on a shared parser. If you hold both a Broker Data Feed and an IDX feed, both write to one listing schema, with your own listings flagged for featured placement.

Custom

Any stack that can run a schedule will do. The sync writes one listing schema, so a change in the feed platform touches the client code only, not your pages.

How the switch happens

Old feed stays up until the new one agrees.

Your listings never go blank. The new sync runs beside whatever feeds the site today, and we only switch when the two match.

  1. Audit

    We check your Doorify MLS access, the feed platform, your platform and what the site needs to show.

  2. Run the new sync beside the old

    It fills its own tables while your current listings stay up.

  3. Compare

    Counts, statuses, photos and rosters checked against the feed.

  4. Switch and retire

    Pages read from the new sync. The old plugin or script is removed.

Choosing a feed

Vendor feed, direct feed or your own listings?

Doorify gives you three feeds to choose from. A Broker Data Feed is free but only has your listings. A vendor feed comes through a registered vendor. A direct IDX feed gives the whole office raw data, which Doorify notes needs a developer.

Doorify lists more than one data feed platform for vendors. The audit checks which one your access uses, and what each costs, before a build is quoted.

Broker Data FeedYour office's own listings, no fee, per Doorify.
Vendor IDX feedThrough a vendor registered with Doorify.
Direct IDX feedRequested by the Broker in Charge, covers the whole office.
Start here

MLS feed audit

$499credited to the integration
  • Your MLS access and feed type checked: RESO Web API, RETS, Trestle, Bridge, MLS Grid
  • Your platform, data model and hosting checked
  • Written sync plan: what syncs, how often, what shows where
  • Fixed quote for the integration
Request this package
What happens next

  1. You send the basics.

    Your site's address, what it runs on, and which MLS or feed you have access to.

  2. We check the feed and the site.

    Access, fields, photos, rosters, and how your platform stores listings.

  3. You get a written plan.

    What syncs, how often, what shows where, and a fixed price for the build.

  4. You decide.

    If you go ahead, the $499 comes off the integration.

We are an independent developer. We are not affiliated with, or certified by, any MLS or data provider named on this page.

Other boards

On a different MLS?

FAQ

Before the audit.

Yes. Doorify MLS dates the change to September 10, 2024. It is the same MLS for the Triangle, under a new name.
Use a vendor registered with Doorify MLS, which requests the feed for your office, or have the Broker in Charge request a direct IDX feed for the whole office.
A Broker Data Feed of your office's own listings has no fee, per Doorify. A full IDX feed is a separate request.
Yes. Listings are included by default. The Broker in Charge contacts Doorify MLS to opt out.
No. We are an independent developer with no affiliation with Doorify MLS or Triangle MLS. We work under the access you are granted.
Active listings every 2 to 3 hours, configurable, with a weekly full re-sync and a daily purge of off market listings.
You can, the first version. Many RETS era feeds were built quickly and broke over the next few years: token changes, board rule changes, photos moving hosts, purges that wiped sites. The audit tells you what you would be signing up for either way.
The feed audit is $499 and credited to the integration. The integration is quoted as a fixed price after the audit.

Find out what your feed needs.

Send the site's address and the feed you have access to. The audit gives you a written plan and a fixed quote.

Book the feed audit MLS Data Integration